Core Shell Ellipsoid



Parameters for this model are the core axial ratio $X_{core}$ and a shell thickness $t_{shell}$, which are more often what we would like to determine and make the model better behaved, particularly when polydispersity is applied, than the four independent radii used in the original parameterization of this model.

The geometric parameters of this model are shown in the diagram above, which shows (a) a cut through at the circular equator and (b) a cross section through the poles, of a prolate ellipsoid.

When $X_{core}$ < 1 the core is oblate; when $X_{core}$ > 1 it is prolate. $X_{core}$ = 1 is a spherical core.

For a fixed shell thickness $X_{polar shell}$ = 1, to scale $t_{shell}$ pro-rata with the radius set or constrain $X_{polar shell}$ = $X_{core}$.

.. note::

When including an $S(q)$, the radius in $S(q)$ is calculated to be that of a sphere with the same 2nd virial coefficient of the outer surface of the ellipsoid. This may have some undesirable effects if the aspect ratio of the ellipsoid is large (ie, if $X << 1$ or $X >> 1$), when the $S(q)$ - which assumes spheres - will not in any case be valid. Generating a custom product model will enable separate effective volume fraction and effective radius in the $S(q)$.

If SAS data are in absolute units, and the SLDs are correct, then scale should be the total volume fraction of the "outer particle". When $S(q)$ is introduced this moves to the $S(q)$ volume fraction, and scale should then be 1.0, or contain some other units conversion factor (for example, if you have SAXS data).

The calculation of intensity follows that for the solid ellipsoid, but with separate terms for the core-shell and shell-solvent boundaries.

$$ P(q,\alpha) = \frac{\text{scale}}{V} F^2(q,\alpha) + \text{background}

.. In following equation SK changed radius\_equat\_core to R_e $$
\begin{align*} F(q,\alpha) = &f(q,R_e,R_e.x_{core},\alpha) \\ &+ f(q,R_e + t_{shell}, R_e.x_{core} + t_{shell}.x_{polar shell},\alpha) \end{align*}


$$ f(q,R_e,R_p,\alpha) = \frac{3 \Delta \rho V (\sin[qr(R_p,R_e,\alpha)] - \cos[qr(R_p,R_e,\alpha)])} {[qr(R_p,R_e,\alpha)]^3}

$$ r(R_e,R_p,\alpha) = \left[ R_e^2 \sin^2 \alpha + R_p^2 \cos^2 \alpha \right]^{1/2}

$\alpha$ is the angle between the axis of the ellipsoid and $\vec q$, $V = (4/3)\pi R_pR_e^2$ is the volume of the ellipsoid , $R_p$ is the polar radius along the rotational axis of the ellipsoid, $R_e$ is the equatorial radius perpendicular to the rotational axis of the ellipsoid, $t_{shell}$ is the thickness of the shell at the equator, and $\Delta \rho$ (the contrast) is the scattering length density difference, either $(\rho_{core} - \rho_{shell})$ or $(\rho_{shell} - \rho_{solvent})$.

For randomly oriented particles:

$$ F^2(q)=\int_{0}^{\pi/2}{F^2(q,\alpha)\sin(\alpha)d\alpha}
For oriented ellipsoids the *theta*, *phi* and *psi* orientation parameters will appear when fitting 2D data, see the `elliptical-cylinder` model for further information.


see for example:

Kotlarchyk, M.; Chen, S.-H. *J. Chem. Phys.*, 1983, 79, 2461
Berr, S. *J. Phys. Chem.*, 1987, 91, 4760

Authorship and Verification

**Author:** NIST IGOR/DANSE **Date:** pre 2010
**Last Modified by:** Richard Heenan (reparametrised model) **Date:** 2015
**Last Reviewed by:** Steve King **Date:** March 27, 2019


Created By sasview
Uploaded Sept. 7, 2017, 3:56 p.m.
Category Ellipsoid
Score 0
Verified Verified by SasView Team on 07 Sep 2017
In Library This model is included in the SasView library by default


Fri 10 Dec 2021 at 12:15
I get error while opening this model and can not use it... :( Any similar models out there??

Please log in to add a comment.